Depaepe Telecom HD Max - One Touch Memory Keys; Storing a Number into a One Touch Memory Key; Calling a Number Stored in M1, M2 or M3; 2 Touch Memory Keys

12
One touch memory keys
3 numbers can be stored into the memory keys M1, M2 and M3.
To call a number stored in one of these 3 locations, simply pick up
the handset and press the memory key. Each memory can store up to
16 digits numbers .
Note : disconnecting the phone from the line will erase the numbers
stored into the memory keys.
Storing a new number into a location where one number is already
stored will automatically erase the previous number stored.
To erase a memory without storing a new number, simply follow the
storing process (detailed here after) without entering any number.
Storing a number into a one touch memory key
-Pick up the handset
-Press PROG key
-Enter the number to store (maximum of 16 digits) and, if needed,
insert a timed pause (by pressing P key) each time a tone has to be
heard before continuing the dialing process (useful when dialing
behind a PABX or for long distance services access for instance).
-Press PROG key again.
-Press the memory key where this number should be stored (M1, M2
or M3).
-Hang up the handset
-Repeat this operation for the other one touch memory keys.
Calling a number stored in M1,M2 or M3
-Pick up the handset
-Press M1, M2 or M3, the number stored will be dialed
automatically.
2 Touch memory keys