Depaepe Telecom Securphone IP

Need help?

Do you have a question about the Depaepe Telecom Securphone IP and is the answer not in the manual?

Summary

Description

1. Calling

Details on different calling modes, including hotline and memory dialling.

2. Auxiliary dry contacts

Explains the use of dry contacts for triggering external devices like alarms or cameras.

3. Voice server

Describes access to IP settings via the phone's embedded voice server.

4. Lightning

Details about backlighting for keypad, buttons, and LEDs for visibility.

Installation

2.1. Line connection and installation

Instructions for connecting the phone and performing line installation.

2.2. Drilling plans

Provides layout details for wall drilling for mounting the device.

2.3. Cable routing and connection

Guidance on proper cable routing to ensure protection against humidity and weather.

How to use it

3.1. Calling

Steps for initiating calls using the keypad or memory buttons.

3.2. Answering a call

Instructions for answering incoming calls, including call waiting.

3.3. Amplified speaker

Details on activating and adjusting the amplified speaker for group listening.

3.4. Hold a call

Procedures for putting calls on hold and resuming them.

3.5. Call transfer

Methods for performing blind and attended call transfers.

General programming

4.1. Internal keypad for models without front panel keypad

How to access main IP parameters using the internal keypad.

4.2. Voice menu of the phone

Using the embedded voice server for quick access to settings and configuration.

4.3. Standard factory settings

Overview of default settings configured on the device's PCB.

4.4. Phone settings via Web interface

Instructions for configuring the phone's network and other settings via its web interface.

4.5. Settings via the SecurPhone IP

Methods for configuring network settings using the phone's internal or external keypad.

4.6. Checking IP settings

Procedures for checking IP address, subnet mask, gateway, and DNS settings.

4.7. Memory storing (button and emergency call)

How to store speed dial numbers and emergency call numbers.

4.8. Lightning setting

Configuration options for keypad and button backlighting using miniature switches.

4.9. Ringer volume setting

Adjusting the ringer volume using a 3-position switch on the PCB.

4.10. Amplified speaker setting and volume adjustment

How to activate the amplified speaker and adjust its volume via a potentiometer.

4.11. Restore to standard factory settings

Procedures for resetting the device to its original factory default settings.

Special features

5.1. Ringing and off-hook handset relay detection

Explanation of dry contacts for detecting ringing and off-hook states.

5.2. LEDs panel

Description of the LED panel's operating modes and activations.

Templates for front plate customization

Specifications

Declaration of conformity

Warranty and after sales service