To Next PageTo Next Page
Need help?Do you have a question about the Depaepe Telecom Sonnerie DECIBEL SIP and is the answer not in the manual?
Describes the ringing function upon receiving calls, including SIP server or peer-to-peer modes and call supervision.
Details the 3-position detection relay for controlling external devices like bells, cameras, or lights.
Covers options for customizing ringer sound, boost, and lighting configurations at idle or during ringing.
Explains the physical mounting, connection points, and fixing methods for the device without opening the housing.
Details how the device is powered, primarily via PoE through the Ethernet cable.
References subsequent pages for detailed diagrams showing hole placement for installation.
Lists the default configuration parameters for network, SIP accounts, and management settings.
Provides instructions on accessing and configuring the device's network and SIP account settings through its web interface.
Explains how to configure the device's lighting behavior using miniature switches for different combinations.
Describes configuring subtle lighting effects, such as LED status at idle and during ringing, via the web page.
Details how to adjust the ringtone volume using a 3-step switch located on the top edge of the product.
Outlines the procedures for resetting the device to its original factory default configuration via web interface or reset key.
Covers configuration for using the ringer in a SIP server environment, including call supervision via BLF mode.
Explains configuration for peer-to-peer mode and call group mode, allowing customization of ringtones for different extensions or IPs.
Details the ringing relay output (dry contacts) for controlling external devices like auxiliary ringers or alarms.
General| Category | Intercom System |
|---|---|
| Protocol | SIP |
| Type | SIP |
| Power Supply | PoE |
| Connection | Ethernet |
| Compatibility | SIP PBX |
