Do you have a question about the Derbi boulevard 125 4t and is the answer not in the manual?
Fuel System | Carburetor |
---|---|
Cooling System | Air cooled |
Transmission | Automatic CVT |
Front Suspension | Telescopic fork |
Rear Suspension | Single shock absorber |
Front Brake | Disc |
Rear Brake | Drum |
Front Tire | 120/70-12 |
Rear Tire | 130/70-12 |
Fuel Capacity | 7.5 liters |
Engine | 124 cc, 4-stroke, single-cylinder |
General safety precautions and guidelines for vehicle maintenance operations.
Detailed specifications and parameters of the vehicle's engine.
Description and specifications of the front and rear braking systems.
Specific torque values required for assembling various vehicle components.
List of specialized tools required for vehicle maintenance and repair.
Schedule of regular maintenance tasks and their recommended intervals.
Procedure for checking and adjusting the engine's ignition advance timing.
Common engine performance problems, starting difficulties, and fuel consumption issues.
Troubleshooting common problems in the electrical system, including battery and lights.
Diagnosis and solutions for problems related to steering, suspension, and brake systems.
Diagrams and procedures for ignition, starting, and battery recharge circuits.
Explanation of the immobiliser system, diagnostic codes, and related checks.
Procedures for removing, inspecting, and refitting automatic transmission components.
Steps for disassembling, inspecting, and refitting the crankcase, crankshaft, and bearings.
Procedures for removing, cleaning, refitting, and adjusting the carburettor.
Procedures for removing, overhauling, and refitting front wheel, fork, and handlebar.
Maintenance and troubleshooting for rear wheel, shock absorbers, and drum brake.
Detailed procedures for servicing the front brake calliper, disc, pads, and fluid system.
Procedures for removing and servicing the air filter and fuel tank.
Checklists for aesthetic appearance and tightening torque of vehicle components.
Comprehensive tests including fluid levels, road test, static test, and functional inspections.