DERMAPEN 4 - Step 3: Treatment Setup

To Next Page

To Previous Page

English

6 - ORDER OF TREATMENT

Step 3 – Treatment with Dermapen 4™

1. Insert a charged battery into the Dermapen 4™, or plug in the Power Adaptor.

2. Using gloved hands, insert a sterilised Needle Cartridge into the Dermapen 4™ tip.

3. To assist prevention of cross-contamination, stretch the sterile DpSleeve over the

Cartridge and Dermapen 4™ as shown.

4. Power on the Dermapen 4™. If required, sync the Dermapen 4™ via Bluetooth.

5. Select the needle depth and speed of the Dermapen 4™ that best suits the treatment

area. Refer to 5.5 – Potential Depth Ranges for guidelines.

APPLY DpSLEEVE TO DERMAPEN 4

SELECT NEEDLE DEPTH, SPEED, DEPTH RANGE