EasyManua.ls Logo

Desa Door User Manual

Default Icon
16 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
This package includes (Style of pushbutton and chime may vary from illus-
tration):
Wireless chime
Wireless pushbutton w/battery
Hardware pack
You'll need to buy 2 "C" alkaline batteries for the chime. In typical use,
alkaline batteries will last up to one year.
Wireless Chime
3.Install 2 alkaline "C"
batteries. Make sure
batteries are oriented
properly.
2.Open chime case.
Press in catch on bot-
tom of chime and lift the
case open.
5. Mount pushbutton and chime.
Use either screws or double sided tape to mount
pushbutton.
To mount with screws, remove back of case by
pushing in tab on bottom with a small screwdriver.
© 2003 DESA Specialty Products™ 595-5551-09
Case Style "A"
Case Style "B"
4. Test range. Temporarily position chime and
pushbutton where you want them mounted.
Press pushbutton to verify chime and
pushbutton work properly. If chime does not
sound, see Troubleshooting.
Battery
Battery
12345678
1.Install alkaline type A23 12 volt pushbutton
battery. Remove back of case by pushing in
tab on bottom with a small screwdriver. Make
sure battery is oriented properly (see page 3).
Question and Answer IconNeed help?

Do you have a question about the Desa Door and is the answer not in the manual?

Desa Door Specifications

General IconGeneral
MaterialWood
Height80 inches
Width36 inches
ColorWhite
Thickness1.75 inches
StylePanel

Summary

Wireless Chime Installation

Pushbutton Battery Installation

Instructions for installing the pushbutton battery, including case opening.

Chime Battery Installation

Instructions for installing the two 'C' alkaline batteries into the chime.

Range Testing

Procedure to test the range and functionality of the chime and pushbutton.

Mounting Pushbutton and Chime

Guidance on mounting the pushbutton and chime using screws or tape.

Code and Tune Settings

Code Settings

Steps to set system codes by adjusting jumpers on pushbutton and chime.

Tune Settings

Instructions for selecting and changing the chime's tune.

Pushbutton Battery Replacement

Guide for replacing the pushbutton battery, noting positive terminal orientation.

Troubleshooting

Chime Doesn't Sound

Common issues and solutions when the chime does not sound.

Chime Doesn't Work When Installed

Troubleshooting steps for when batteries are fine but the chime is not functional.

Technical Service and Regulatory Information

Technical Service Contact

Information on how to contact technical support for assistance.

Regulatory Compliance

Details on FCC and Industry Canada compliance for the device.

Warranty Information

One Year Limited Warranty

Details of the limited warranty, coverage, exclusions, and disclaimers.