DESi KC2 - Changing Keypad Language

7
How to Send a RF Signal from Controllers
Remote Controllers: Press 1st button.
Open Button: Press the button.
Fingerprint Reader: Wake up and touch to locking button.
Keypad: Wake up and touch to lock button.
Auto-Closer: Bring the magnet closer to the device and than
seperate it from device.
Home-Automation Interface: Short-circuit red and white cables
and than open-circuit.
4.1.1 Changing the Keypad Language
- Tap with your palm to wake up the device. Then touch the
“SETTINGS” button. "MASTER" will be displayed on the screen.
- Enter 5 digit master password. “≡≡” symbol will appear on
the screen.
- Touch the "LOCK" button. "LANGUAGE" will appear on the
screen. Touch the "SETTINGS" to enter menu.
- Touch the "LOCK" to change language and touch "SETTINGS"
to confirm.