Designa DESE050 - Page 20

NOTE:
Once modied a programme must be
selected if you want to begin using it.
Timer Modes
To choose the timer mode press Menu and then Down to select Mode. Then press Enter.
Then select Timer Mode, again using the Enter button.
Select User Timer mode by pressing Enter.
For options User Timer, three choices are available - Select, Preview and Modify.
• Select - choose this timer option.
• Preview - view the times currently set.
• Modify - change the times currently set.
When Modify is chosen, select and change each option using the Up, Down and Enter buttons.
At the end of each period, select Next to move to the following period. When a day is complete
select Save to update it.
Once the rst day has been set up it is possible to copy these settings to successive days or all
days by either choosing Copy Next or Copy All.
If preferred each day can be modied individually and saved. It is also possible to Clear each
day or Clear All days to factory default times. Options are;
• Save - save times for one day.
• Copy Next - copy times to following day.
• Copy All - copy times to all seven days.
• Clear - factory defaults all times that day.
• Clear All - factory default times for all seven days.
To select a mode, choose Select and press Enter.
Main Menu
Date/Time
Mode
Options
Mode
Timer
Copy All
Selected
User Timer
Comfort On
Choosing and setting a Mode
20