desmon GBF-5P - Remote Units, Units GBF20 GN2;1, GBF40 GN2;1,GBF20 GN1;1; How to Access Evaporator Assembly; Evaporator Assembly Description

39 Rev 07/04/2015
4.3.4
Remote units, units
Remote units have the condensing unit in a separate box. To access the
unscrew the metal top cover.
4.4.
HOW TO ACCESS
All units, including remote and self
evaporator assembly, consisting of:
a. An evaporator coil
b.
One or more evaporator fan
c. A Thermal Expansion
valve
d. A probe sensor
located
e.
A hinged cover panel holding motor fans and finger guards
f. A temperature sensor
mounted to the panel
4.4.1
Evaporator
EVAPORATOR ASSEMBLY
SMALL UNITS
TOP COVER
Blast ch
Remote units, units
GBF20GN2/1, GBF40GN2/1,
GBF
Remote units have the condensing unit in a separate box. To access the
HOW TO ACCESS
EVAPORATOR ASSEMBLY
All units, including remote and self
-contained
models, are equipped with one
evaporator assembly, consisting of:
One or more evaporator fan
s (depending on the model)
valve
(in some case aM.O.P. valve)
located
on the evaporator output (defrost prob
e)
A hinged cover panel holding motor fans and finger guards
mounted to the panel
(cabinet probe)
Evaporator
Assembly Description
EVAPORATOR ASSEMBLY
LARGE UNITS
CABINET
PROBE
HINGED
PANEL
CONDENSING BOX
Blast ch
iller Service Manual
GBF
20GN1/1
Remote units have the condensing unit in a separate box. To access the
condensing unit,
models, are equipped with one
e)
CONDENSING BOX