Why is my deSoutter Medical Equipment battery low in power?
If the deSoutter Medical Equipment's battery is low on power, it could be due to several reasons. First, the battery might simply be discharged, in which case you should charge it. Alternatively, you might be using an incorrect battery, so try using a larger battery. Finally, the battery might be expended and need replacement.
What to do if my deSoutter Medical Equipment battery cuts out?
If the battery of your deSoutter Medical Equipment cuts out, it might be because the battery is discharged and needs charging. Another reason could be that the battery is too warm, in which case you should allow it to cool and consider using a larger battery. Also, the battery might be overloaded, in this case the safety cut-out will reset within 20 seconds, so ensure the cutting accessory is sharp.
General| Brand | deSoutter Medical |
|---|---|
| Model | AB-70 Series |
| Category | Medical Equipment |
| Language | English |
Identifies the BC-700 battery charger and associated battery models (AB-70x, SB-70x).
Provides critical warnings and precautions for safe operation and handling of the equipment.
Defines the product's purpose and outlines proper disposal procedures according to regulations.
Explains common symbols used in the manual for reference and understanding.
Details the symbols displayed on the device's touch-screen interface for user interaction.
Covers restrictions and safety protocols for reprocessing sterilizable components.
Provides step-by-step instructions for manual cleaning procedures.
Details the automated cleaning process using a washer-disinfector.
Covers equipment maintenance, functional testing, and preparation for sterilization.
Describes steam sterilisation methods for handpieces, accessories, and batteries.
Details STERRAD/STERIS sterilisation, storage, and post-reprocessing handling.
Outlines manual cleaning procedures for equipment not intended for sterilisation.
Identifies and describes the parts located on the front of the BC-700 charger.
Details the mains inlet, fuse drawer, power switch, and other rear panel features.
Explains the status indicators, bay numbers, and buttons on the touch-screen.
Provides instructions for safely installing and replacing the charger's fuses.
Guides users on how to fit and remove the interchangeable charger modules.
Covers adjusting display contrast, brightness, and selecting the user interface language.
Details the process for charging batteries designated as sterile.
Specific instructions for charging AB-701 and AB-702 batteries.
Step-by-step guide for charging the AB-600 battery model.
Instructions for charging the AB-450 battery, including adaptor usage.
Explains how to use the healthcheck facility and select batteries for testing.
Details the procedure for using batteries with aseptic housings, ensuring sterile technique.
Information on battery capacity indicators and recommendations for battery shelf-life.
Lists specifications for the BC-700 battery charger, including power and environmentals.
Details various battery systems, housings, shields, and related sterilisation accessories.
Provides solutions for problems like unclear display or battery detection failures.
Offers fixes for battery power issues, overheating, and overload conditions.
Outlines the product's warranty coverage and conditions of liability.
Details product compliance with electromagnetic emissions standards.
Explains electromagnetic immunity requirements and RF equipment separation distances.
To Next Page
