Detcon 610-N4X-SA - User Manual

Model 610-N4X-SA
NEMA 4 X Control Enclosure
RESET/ACK
BUTTON
Model 610-N4X www.detcon.com
d e t c o n I n c .
Detcon Inc.
www.detcon.com
Houston Texas
Gas Detection Control System
www.detcon.com
Houston Texas
Detcon Inc.
Operator’s Installation and Instruction Manual
Covers 3 and 5 relay, Stainless and Fiberglass Enclosures
DETCON, Inc.
3200 Research Forest Dr.,
The Woodlands, Texas 77387
Ph.281.367.4100 / Fax 281.298.2868
www.detcon.com
July 15, 2005• Document #3001• Revision 0.1

Summary

Introduction

System Description

Overview of the Detcon Model 610-N4X-SA system and its components.

Technical Specifications

Details electrical, dimensional, capacity, power, and output specifications.

Relay Logic and Assignments

Explains relay assignments (K1-K5) and their logic for alarm conditions.

Front Panel Alarm Reset Function

Describes the function of the momentary switch for resetting alarms.

Installation Guide

System Start Up

Steps for powering up the 610-N4X-SA system after wiring completion.

Maintenance and Repair

Adding and Removing Control Modules

Procedures for adding or removing control modules, including jumper settings.

Model 10 Control Module Replacement

Guidance on replacing a Model 10 control module.

Circuit Breaker Troubleshooting

How to reset or replace the circuit breaker if it trips.

Power Supply Replacement

Steps for replacing the unit's power supply.

Spare Parts Identification

Product Warranty Information

Detcon 610-N4X-SA Specifications

General

Enclosure Type	NEMA 4X
Color	Gray
Ingress Protection	IP66
Certifications	UL
Operating Temperature	-40°C to 60°C (-40°F to 140°F)