Detecto 758C User Manual

National Conference on Weights and Measures
15245 Shady Grove Road, Suite 130 • Rockville, MD 20850
Certificate Number: 06-104
Page 1 of 2
National Type Evaluation Program
Certificate of Conformance
for Weighing and Measuring Devices
This device was evaluated under the National Type Evaluation Program (NTEP) and was found to comply with the applicable technical
requirements of Handbook 44, "Specifications, Tolerances, and Other Technical Requirements for Weighing and Measuring Devices."
Evaluation results and device characteristics necessary for inspection and use in commerce are on the following pages
Mike Cleary Don Onwiler
Chairman, NCWM, Inc. Chairman, National Type Evaluation Program Committee
Issue date: December 6, 2006
Note: The National Conference on Weights and Measures does not "approve","recommend", or "endorse" any proprietary product or material, either as a
single item or as a class or group. Results shall not be used in advertising or sales promotion to indicate explicit or implicit endorsement of the product or
material by the NCWM.
Submitted by:
Detecto Scale Company, a Division of
Cardinal Scale Manufacturing Company
203 East Daugherty St.
Webb City, MO 64870
Tel: (417) 673-4631
Fax: (417) 673-5001
Contact: Stephen Langford
Email: slangford@cardet.com
For:
Indicating Element
Digital Electronic
Model: 758C
n
max
: 5 000
Accuracy Class: III
Standard Features and Options
AC or Battery Power
Auto Shut Off Feature
Selectable Sleep Mode
Semi-automatic Tare Feature
RS232 Communication Port
13 mm High LCD Weight and Body Mass Index Display: Body Mass Index not evaluated
9.5 mm High LCD Height Display: Not evaluated
Motion detection
Center of Zero Annunciator
Gross / Net Display
Body Mass Index Calculation: Not evaluated
Selectable Units (Pounds, Kilograms, Ounces, Grams)
Selectable Filtering
19-Key Membrane Keyboard
Display Lock Feature: Not "Legal For Trade"
Temperature range: -10 °C to 40 °C (14 °F to 104 °F)

Detecto 758C Specifications

General

Brand	Detecto
Model	758C
Category	Measuring Instruments
Language	English

Summary

Indicating Element Details

Device Model and Accuracy

Specifies the digital electronic indicating element, model 758C, with a maximum capacity and accuracy class III.

Submission and Contact Information

Submitter Details

Identifies Detecto Scale Company as the submitter, including their address, phone, and contact person.

Standard Features and Options

Device Features

Lists standard features like AC/Battery power, auto shut-off, sleep mode, semi-auto tare, RS232 port, LCD displays, and selectable units.

Operating Temperature Range

Defines the operational temperature range for the device, from -10 °C to 40 °C (14 °F to 104 °F).

Device Application and Identification

Application Description

Describes the device's use as a general purpose indicating element connected to a certified load receiving element.

Identification Label Location

Specifies that the self-destructive identification label for the Model 758C is located on the rear panel.

Sealing and Test Conditions

Sealing Provisions

Details the provisions for applying lead-wire security seals to a metal tab beneath the end cap retaining screws.

Evaluation Test Conditions

Outlines test conditions including device evaluation focus, interface with weighing element and printer, voltage tests, and accuracy tests.

Evaluation Criteria and Conclusion

Type Evaluation Criteria

States the criteria used for evaluation: NIST Handbook 44 and NCWM Publication 14, 2006 Editions.

Evaluation Findings

Concludes that the devices comply with applicable requirements based on evaluations and manufacturer information.