DETEWE TA 33clip - Default Chapter; Planning Your System

Planning your system
* This is the telephone number
which – unless blocked by your
settings – is displayed on the
called subscriber’s terminal (see
also pages 27 and 35).
*
Analogue line 2
code digit
Analogue line 1
code digit
1
2
3
Analogue line 1 telephone number
code digits
Your telephone numbers
for line 1
1
2
3
Analogue line 2 telephone number
code digits
Your telephone numbers for line 2
*
In the table opposite, please
enter the telephone numbers
(MSNs*), calls to which are to
be signalled on the correspon-
ding line. The TA33clip can
manage up to six numbers. A
number can be allocated to
more than one line, and each
line can be allocated up to three
numbers.
Analogue lines 1 and 2 and the
telephone numbers are
assigned code digits. These are
required for setting and/or pro-
gramming the relevant fea-
tures. Please use this setting aid
to program the TA 33clip (from
page 17 onwards).
* MSN = Multiple Subscriber Num-
ber. These are the ISDN numbers
which you received from your net-
work operator.
Note
After mounting and commis-
sioning the TA 33clip you can
start making and receiving calls
immediately without any pro-
gramming. To ensure that you
don’t miss a call, all calls are sig-
nalled on both lines.
When you make an external
call, the main number of your
ISDN line is transmitted to the
called party by the network
operator.
Please note the settings for the
TA 33clip on delivery listed on
page 38.