DETROIT DD13 - Page 46

Always use lubricating oils and oil filters that meet Detroit™ specifications. The
use of lubricating oils and/or oil filters that do not meet Detroit™ specifications
may result in premature wear or engine failure. Consult with an authorized
Detroit™ service outlet to obtain the proper engine oil filter. For additional
information on selecting lubricating oil, Refer to section "Synthetic Oils and
Additives". For a listing of required lubrication system service intervals, Refer to
section "Preventive Maintenance Tables".
Engine Oil Capacities
Fill the engine to the proper level with the recommended viscosity and grade of
engine oil. For instructions on checking the lubricating oil level, Refer to section
"How to Check the Lubricating Oil Level". The engine oil capacities for the
Detroit™ Gen 5 Heavy Duty engine are listed in the table below. Contact a
Detroit™ service outlet if more specific information is needed.
Table 2.
Engine Oil Capacities
Service Fill (Oil and Filter Change) 43.0 L (45.0 qt)
Oil Pan Capacity, High Limit 40.0 L (42.0 qt)
Oil Pan Capacity, Low Limit 35.0 L (37.0 qt)
Engine Systems
46 All information subject to change without notice.
Copyright © 2020 DETROIT DIESEL CORPORATION DDC-SVC-MAN-0217