DEVAISE AHDG036 - Page 21

16
BALL BEARING
BALL BEARING
Please full extend the slide runners.1.
2.
Simply push the ball bearing cart all the way to the
end of the slide(in both sides).
1
2
REMARK
FRONT
FRONT
FRONT
FRONT
21
22
10
REMARK
1. Align the slide runners on the drawer with the unit and push it carefully inside until it stops.
2. If the drawer does not go in smoothly please take it out and repeat the step.
3. It is recommended to install the bottom drawer first to prevent tipping.