dS28
dS28
32
32 User Manual v4.10
Here we hold both lights at Red for 30 seconds to give traffic time to traverse the controlled
area. Then Red + Amber for two seconds followed by Green for 60 seconds. We then stop the
traffic with Amber for 3 seconds followed by Red. Again we hold both lights at Red for 30 sec-
onds before letting the other queue through at line 6.
To watch it happen, set relays 21, 25 & 29 to K1, K2 & K3 and set relays 24, 28 & 32 to K4, k5
& K6.
Then look at the application page.
Copyright © 2016-2022, Devantech Ltd.
All rights reserved.
www.robot-electronics.co.uk
34
To Next Page
Loading...