28
ELECTROVAP KIT MC
Cylinder maintenance guide
for tap or hard waters
The water tightness is indicated in French grade, the said value is the water
hydrotimetric content (TH).
The water quality is to be mentioned on your request so that to fit the most appropriate
steam cylinder for the best working of the humidifier.
300 H 800 H
1000 H 2000 H 4000 H
Estimated cylinder maintenance curve
Working hours
X= Humidifier steam demand
Model KIT MC 5 to 15-2 KIT MC 20 to 60
Length (mm) 160 250
Length of the genuine stainless steel electrode plates
During cylinder maintenance (page n° 29), it is recommended to measure the
length of the electrode plates. The latter should be replaced when the length is
shorter than 1/3 or 1/2 of the original length (s.a. above table).
Example given: it is recommended to maintain (if cleanable type) or change (if disposable
type) the steam cylinder every 800 to 900 hours of operation for a humidifier running at full
capacity and using a water of TH20.
To Next Page
Loading...
