Develop ineo+ 284 - Product Basic

3
Product Guide ineo
+
224/284/364/454/554
P
P
r
r
o
o
d
d
u
u
c
c
t
t
B
B
a
a
s
s
i
i
c
c
MODEL DEVELOPMENT CODE
Zeus X Zeus 0 Zeus 1 Zeus 2 Zeus 3
MODEL NAME
ineo
+
554 ineo
+
454 ineo
+
364 ineo
+
284 ineo
+
224
SUCCESSOR MODEL FOR
ineo
+
552 ineo
+
452 ineo
+
360 ineo
+
280 ineo
+
220
ESTIMATED SALES START
08/2012 07/2012
INFOSOURCE SEGMENT
IV III II
ALSO AVAILABLE AT
KM bizhub C554/C454/C364/C284/C224
Olivetti d-Color MF554/MF454/MF364/MF284/MF222
TYPE
Console/Stationary Platen
Colour MFP
MAX. (PEAK) MONTHLY PAGE
VOLUME (COLOUR/MONO)
50k/150k 38k/112k 5k/19k 3k/11k
AVERAGE/PERMANENT MONTHLY
PAGE VOLUME
33.3k 30k 13.3k 10k
MACHINE LIFE
2000k or 5
years
1800k or 5
years
800k or 5
years
600k or 5 years
FLAT BED SCANNER/
EXPOSURE LAMP LIFE
250k/580k
MCBF (Mean
Copies Between
Failure)
Total
Colour
Mono
85.3k
70.3k
91.8k
68.5k
56.5k
73.8k
57.4k
47.3k
61.8k
48.2k
39.8k
51.9k
42.1k
34.7k
45.4k
MCBJ (Mean Copies Between Jam)
10k with standard paper
MTTR (Mean Time To Repair)
No figure available
STANDARD COPY MODE (MONO &
COLOUR)
6 Pages/
job
5 Pages/
job
4 Pages/
job
3 Pages/
job
2 Pages/
job
STANDARD ORIGINAL DENSITY
5 % Mono & Color
SAFETY & ENVIRONMENT
English/German Data Sheets
Downloadable in the dbox:
dbox/Support/CSES Download/Open CSES Download/Document/
Safety & Environment
PLEASE NOTICE
Standard paper weight for systems is 80 g/m
2
for monochrome machines and 90 g/m
2
for full colour ones. Since using these
standards result in optimum system performance, all specifications on performance, reliability, maintenance and replacement
based on those standard papers. Using thick papers, labels, transfer and polyester films continuously can increase the wear
and tear on replacement parts and consumables – meaning your servicing costs will go up.
Use the bypass or the lower tray from the paper feed unit when working with materials having such characteristics as polyester
films, textile transfer films and labels. Otherwise, you may be faced with double feeding or a higher number of feeding jams.
If possible use subtray when working with materials having such characteristics as polyester films, textile transfer films and
labels. Roller-marks on the copy or print may appear or increased jams can occur. Standard paper weights yield the best
possible copy and print results. Using higher grammage may influence the quality of the output. Using standard paper weights
also guarantees that double sided copies and prints are made reliably. Different characters of films as well as thick, thin and
coated papers may increase the jam rate for double sided copies and prints.