DEVI Devireg 316 User Manual

17
Installer Manual
Installation of ground system
The installation of a DEVIreg™ 850 with 1 ground system has been selected.
It is optional if the sensors are connected to the DEVIreg™ 850 before power on or dur-
ing the installation.
The system uses the output System A.
If sensors for System A are not connected - do it now!
Press or wait…
Connect sensors:
System A
System is being scanned to nd type of connected
sensors…
System A
Scanning...
Select system type: Ground.
System type:
Ground
Wait until correct number of sensors for System A is
found.
3 Ground sensor
found. Accept?
Press when all sensors are found…
System A is installed…
System A!
Installed
System is being checked…
Checking system

Press to congure System A (naming sensors
and changing factory settings).
Config system:
System A
Please refer to “Changing parameters and performance of systems” in “User Manual”
for description of the congurable parameters.
If for some reason you do not wish to congure the system now you can press
to
skip conguration of system .
Press to end conguration.
Press  to end
confi guration.

DEVI Devireg 316 Specifications

General

Brand	DEVI
Model	Devireg 316
Category	Controller
Language	English