10. Install new cartridge & gasket.
Service Instruction
SI-6-17-10-G
Replaces SI-6-17-10-F
130524 QC3 REPLACEMENT CARTRIDGE
CARTRIDGE INCLUDES GASKET, INDICATOR WINDOW & HUMIDITY PAPER
2. Release pressure.
7. Replace indicator...
1. Shut-off air.
4. Remove bowl.
3. Loosen 4 screws (3 turns each).
6. Replace indicator – remove nut.
9. Tighten nut gently.
12. Tighten screws tight.
5. Remove cartridge & gasket.
8. Install new window & paper.
11. Install bowl.
4 screws
3 turns
1
2
1
3
2
2
1
...remove paper & window...
...dispose of old parts.
DO NOT OVER-TIGHTEN
1
2
1
2
4 screws
WARNING
RISK OF INJURY – RELEASE ALL AIR PRESSURE BEFORE SERVICING.
!
• The Safety Data Sheet SDS-55 is available on request at www.autorefinishindevilbiss.com.
• The used cartridge is non-hazardous and can be disposed of according to local regulations.
DO NOT
OVER-TIGHTEN
gasket
To Next Page
Need help?
General
