DeVilbiss CAMAIR CT30 - User Manual

SERVICE BULLETIN
Replaces SB-6-182-C
DESCRIPTION
PARTS LIST
SPECIFICATIONS
INSTALLATION
SB-6-182-D
130500 CT30 DESICCANT AIR DRYER
The desiccant air dryer is designed to be a point of
use system. It is capable of removing dirt, water, oil,
and water vapor from compressed air. It consists of a
separator and desiccant cartridge. The cartridge has a
housing material that acts like a coalescer and final
filter.
Air Inlet
Air Outlet
Air Flow Capacity
Maximum Operating Pressure
Maximum Temperature
Humidity Indicator
Water Vapor Removal
Particle Removal
Manual Drain
1/2" NPT (Female)
1/2" NPT (Female)
30 CFM
200 PSIG (14 Bar)
150
o
F (65.6
o
C)
Green:
OK
Yellow: Replace Desiccant
-40
o
F Dew Point
0.1 micron
included
3
1
2
Ref.
No.
Replacement
Part No.
Description
Individual
Parts Req.
1
2
3
4
130505
130511
130510
130504
Humidity Indicator (1 Humidity
Indicator Paper Included)
Drain (Manual)
Gasket
Desiccant Cartridge (Not shown)
1
1
1
1
5 CT-101 Tank Grommet (Not shown)
1
Warning
Warning
Risk of personal injury.
Risk of property damage.
Except as otherwise specified by the
manufacturer, this product is specifically
designed for compressed air service and use
with any other fluid (liquid or gas) is a
misapplication. For example, use with or injection
of certain hazardous gases in the system (such
as oxygen or liquid petroleum gas) could be
harmfull to the unit or result in a combustible
condition that may cause fire or explosion.
Manufacturer's warranties are void in the event of
misapplication and manufacturer assumes no
responsiblity for any resulting loss.
*
*The Material Safety Data Sheet (MSDS-1) is available upon request.
Air Outlet
Air Inlet
Risk of injury. Release all air pressure from
system before servicing system. Use only
specified Camair parts.
5 not shown
(inside tank)

Summary

Description

Desiccant Air Dryer Function

Explains the dryer's purpose, components, and cartridge housing acting as a coalescer and filter.

Specifications

Air Inlet, Outlet & Capacity

Details air inlet/outlet size, airflow capacity, and maximum operating pressure.

Operating Limits & Indicators

Covers maximum temperature, humidity indicator status, and particle removal specifications.

Safety Warnings

Misapplication Warning

Warns against using the product with fluids other than compressed air, voiding warranty.

Servicing Safety

Advises releasing pressure and using specified parts before servicing the system.

Installation

Location and Mounting

Guidance on choosing a location, air inlet temperature, and mounting securely.

Piping and Bypass

Recommendations for depressurizing, installing bypass valves, and connecting the dryer.

Operation and Maintenance

Daily Operation

Instructions for automatic operation and periodic draining of the water separator.

Desiccant Cartridge Replacement

Steps for replacing the desiccant cartridge when the indicator turns yellow.

Humidity Indicator Check

Procedure to check and replace the humidity indicator if it fails to turn green.

DeVilbiss CAMAIR CT30 Specifications

General

Brand	DeVilbiss
Model	CAMAIR CT30
Category	Dehumidifier
Language	English