Introduction
Thank you for purchasing this passive Devine Artis speaker. To make sure you use this loudspeaker
as intended and for optimal performance and protection of this speaker, Devine recommends you read
this user manual.
Box contents:
1x Artis 10 passive loudspeaker
2x monitor stands
Warning!
- This loudspeaker is not suitable for use outside. Keep this speaker away from moisture and rain.
- This loudspeaker is capable of producing sound levels that may cause severe and permanent
hearing damage.
- Make sure the speaker cabinet is installed on a proper surface when used. Place this speaker on the
floor, on a professional speaker stand, on a suitable wall-bracket or on the included monitor feet.
Devine is not responsible for any damage caused by improper installation of this device.
- This speaker is equipped with M8 mounting inserts, which makes rigging on M8 eyebolts possible.
When doing so, contact a skilled technician for your own safety and only use proper eyebolts with
metric thread. Devine does not take responsibility when this device is not properly installed.
- To clean this speaker from any dirt or dust and keep it in optimal shape, use a sponge or cloth with a
non-aggressive solution mixed with water. Do not detach the grill to clean the speaker with any wet
cloth, as this may cause permanent damage!
Features and technical data:
- passive speaker
- robust, lightweight construction
- bass-reflex cabinet
- protective grill
- 10 inch woofer
- 1 inch tweeter with dispersion horn
- maximum power: 150W RMS, 450W peak
- impedance: 8 Ohm
- handle on the side
- 35mm stand adapter with tightening knob
- connections: 2x lockable pro-speaker connection
- monitor stands included
- frequency response: 55 – 18.000 Hz (-10 dB)
- sensitivity: 94 dB (+/- 2 dB)
- size: 360 x 270 x 520 mm
- weight: 6 kg
NOTE: Illustrations in this manual are only for your reference, illustrations might be slightly
different from the actual product.
To Next Page
Loading...
