To Next PageTo Next Page
Need help?Do you have a question about the Devine Blist 12D and is the answer not in the manual?
Key safety points include handling power cords with caution, not removing labels, ensuring ground contact, avoiding loose cables, and not opening the unit.
Device is for mobile use, use original packaging or flightcase. Not for permanent use. Store indoors, dry, and avoid temperature extremes.
Inspect housing for damage, corrosion, and loose connectors. Clean exterior monthly with a dry or damp cloth.
Main fuse located on rear. Replace only with same type/rating. Do not bridge fuses. Always remount fuse cover.
Use supplied power cable. Disconnect and store if not used long-term. Check unit for damage before use.
Supports drives up to 32 GB. Bluetooth password is 1234. Use for streaming audio.
Horn dispersion is wide at the bottom, narrow at the top for optimal sound projection at different distances.
Ports produce airflow for woofer and cool amplifier module. Do not block ports.
Mixes multiple inputs like Bluetooth and microphone. Control volume levels for each signal input.
Transfers signal to another active speaker for daisy-chaining. Carries the master signal mix.
Built-in adapter with tightening knob for secure speaker placement on stands, preventing rattling.
Side handles have monitor feet for use as a floor monitor without separate stands.
No rigging hardware. Use wall bracket with 35mm tube. Do not install above audience.
Use 35mm stands for wide dispersion. Adjust bass/treble for optimal sound quality, especially for floor monitoring.
Details line input, mic input, MP3 player input (SD/USB), Bluetooth, and line output connections.
Specifies IEC power input, voltage range (95-230V AC), frequency, and fuse type (F3.15A).
Specifications for the 12D model: woofer, compression driver, frequency response, sensitivity, and amplifier power.
Specifications for the 15D model: woofer, compression driver, frequency response, sensitivity, and amplifier power.
General
