Devine Blist Live - Technical Specifications; Mixing Panel Features; Speaker Features; Included Accessories

Technical specifications
- self-powered portable PA system
- consists of two portable speakers, with an accessory compartment and mixing panel attached
- easy to set up, easy to use
- quick reference sticker for inputs on compartment lid
- compact system with two 10 inch durable speaker enclosures
- mixing panel with integrated power amplifier
Mixing panel features:
- 4 mono inputs with Peak LED indicator
- 3p XLR input on all mono channels for microphones
- mono line input on all mono channels (6.35 mm TS jack)
- 2-band EQ (treble and bass) on all mono channels
- effect rotary on each mono channel
- volume rotary on each mono channel
- 1 stereo input: stereo RCA, dual 6.35 mm TRS jack input or stereo 3.5 mm TRS mini-jack
- stereo input volume rotary control
- + 48V phantom power for all mono channels, main on/off switch
- built-in reverb effect with master level control
- monitor output: stereo RCA, dual 6.35 mm TRS jack output or stereo 3.5 mm TRS mini-jack
- monitor output volume rotary control
- built-in MP3 player with USB and Bluetooth functionality
- built-in USB charging port for mobile devices and USB gadgets (5 V 1000 mA)
- master volume control with multi-LED VU meter and limit indication
- 6.35 mm TS jackplug speaker outputs
Speaker features:
- high quality and durable polypropylene speaker enclosures
- 10 inch woofer, 1 inch titanium compression driver
- built-in 35 mm speaker stand adapter with tightening knob
- transport handle on top of the enclosure
- protective woofer grill
- integrated dispersion horn for the compression driver
- built-in lock mechanism for accessory compartment and mixing panel
- 6.35 mm TS jackplug speaker inputs
Included accessories:
- 1x IEC C13 to Schuko power cable
- 1x IEC C13 to UK power cable
- 2x 6.35 mm TS jackplug speaker cables (10m)
- 2x dynamic microphone with built-in switch (3p XLR)
- 2x 3p XLR male to XLR female cable
Technical details:
- amplifier power: 2x 75 watt RMS
- amplifier peak power: 2x 110 watt max.
- nominal speaker impedance: 4 ohm
- frequency response: 40 Hz – 18 kHz
- max. SPL: 102 dB
- sensitivity mic input: -35 dBV
- sensitivity line input: -15 dBV
- connection voltage: 95 – 250V AC, 50 / 60 Hz
- total power consumption: 250 watt max.
- power factor: 0,90
- fuse: F 3.15AL, 250 V
- total weight (transporting weight): 21 kg
Any information and illustrations shown in this user manual are subject to change without further notice.
User manual version: 2.0 Creation date + author initials: 29-09-2015 RV Revision date + author initials: 18-02-2017 RV