Specifications
– 2.4 GHz compact wireless microphone system
– 2x wireless handheld microphone with 1x compact receiver
– operates using the 2.4 GHz band that can be used freely worldwide
– 16 channels can be selected per microphone to limit frequency band traffic interference
– dual antenna
– wireless channel synchronisation between microphone and receiver
– GFSK modulation
– operation range: 20 – 30 metres, provided a clear and unobstructed line of sight is maintained between the
transmitter and receiver, and no devices using the 2.4 GHz frequency band are close by.
– A/D and D/A conversion: 16-bit, 34.8 kHz.
Handheld microphone
– practical handheld microphone with sturdy grille
– LCD display screen
– 1 central ON/OFF button (also operates as channel selector)
– powered by 2x AA batteries (included)
– low battery indicator
Receiver:
– fitted with dual antenna
– 19 inch, 1 HE installation format
– 16 way microphone channel selector
– volume control per channel
– signal strength indicator per channel
– link indicator per channel
– powered by external power supply (included)
– separate balanced 3-pin XLR output per channel
– mixed 6.35 mm TRS jack output for connection to external audio system
AC/DC adapter:
– connection voltage: 100 V – 240 V AC, 50/60 Hz
– output: 12 V DC 500 mA, centre positive.
Technical features:
– transmission frequency: 2.404 – 2.474 GHz
– available channels: 16
– bandwidth: 2 MHz
– dynamic range: 85 dB
– total harmonic distortion: < 0.1 %
– receiver operating voltage: 12 V DC 130 mA centre positive
– signal-to-noise ratio: > 95 dB
– receiver sensitivity: – 80 dBm
– signal strength: 10 mW
– modulation type: GFSK
– ultra-harmonics: <20 dB
– batteries: 2x AA batteries (included)
– average battery lifespan: 5 hours of continuous use
The information included in this user manual is subject to change at any time and without notification:
Version:
1.0
Date and author initials: 04-08-2020 RV Revision date and author initials: -