Problem Common Cause Solution
Interference on the same
frequency
It is always possible that someone else in
the vicinity is working on the same
microphone frequency with a similar
system. This can work to your disadvantage
in the form of signal loss or interference.
Try switching to a different microphone
signal or try to improve the ‘line of sight’ and
reduce the distance between the receiver
and microphone transmitter.
Distorted sound Sound settings are not optimal Check the volume level and other audio
system components that may be affecting
the sound quality by overdriving the signal.
Incorrect microphone technique
is being used
Check that the microphone technique of the
performer is correct. If the sound is distorted
or dull, then it is likely that the microphone
grille is being covered by a hand.
The information included in this user manual is subject to change at any time and without notification:
Version:
1.0
Date and author initials: 04-08-2020 RV Revision and author initials: -
To Next Page
Loading...
