Power Button
▪ Press the power button and the unit will begin to operate.
▪ When used for the first time, the default fan speed is gear 1.
▪ If the fan is turned off and back on again, the fan defaults to the gear speed that was last
used.
Speed Button
▪ The fan speed can be adjusted on the control panel or via the remote control (using the +
or – buttons).
▪ Press the speed button to adjust the fan speed.
▪ There are 12 fan speeds available.
▪ If you hold the speed button on the fan base for more than 1s you can cycle through the
12 gear speeds faster.
Oscillation Button
▪ Press the oscillation button to start and stop the automatic horizontal oscillation.
Mode Button
Press the mode button to cycle through the three modes: Normal, Smart and Sleep.
1. Normal: The fan operates as per the selected gear speed, which is shown on the LED
display.
2. Smart Mode: This icon will illuminate when the fan is in smart mode.
The smart mode function will automatically adjust the wind speed in accordance with the ambient
temperature.
To Next Page
Loading...
