5. Press the timer button to enter the timing setting state. Select a shutdown time by using the
Up/Down buttons. The shutdown timing range is 1-24 hours. The timing indicator is illuminated
when the timer is running.
6. Press the Display button once and the digital screen will only display the temperature. Press
the Display button twice to solely display the heating operation icon.
7. Press the Smart heating button and the heater will enter intelligent heating mode. In
intelligent mode the gear position will automatically adjust according to temperature change. The
"Smart" icon will illuminate on the heater's display when the intelligent heating mode is in
operation.
8. Press the Set button followed by the Child lock button to lock the heater. This prevents small
children from carrying out the various functions on the device. To unlock, press the Set button
and then the Child lock button.
9. Press the Body Sensor button for the heater to enter body sensing mode. When body sensing
mode is in operation the device heats up when a moving object is detected. The human body
sensing operation indicator illuminates when human body sensing mode is running. If a moving
object is not detected within two minutes the device will stop heating.
10. Press the Set button followed by the up button to switch between Fahrenheit and Celsius.
11. Press the Set button followed by the down button to reset the Wi-Fi.
12. Press the Set button followed by the power select button to activate the open window
detection function. When the widow detection function is active the 'WO' icon illuminates on the
display. In window detection mode the device stops heating if the ambient temperature drops by
3 degrees within two minutes. At this point the window detection operation icon will illuminate.
13. Press the On/Off button to cease heating if a shutdown timer has not been set.
14. Wi-Fi Operation
Scan the QR code with your mobile phone to download and install
the Smart Life app. Alternatively you can download the app in your
device's app store.
Register an account or log in with existing credentials.
Open the app and select” Add Device" or click on the “+” icon in the
top right- hand corner of the device.
Open the Small Home Appliances category and scroll down to and
select the "Heater" option.
Press "Confirm indicator rapidly blink".
Enter the Wi-Fi network and password, ensuring that is a 2.4GHz
network and not 5GHz.
Make sure the heater, device and router are in proximity whilst the device connects to the app.
The device should now be connected to the Smart Life app. If connection fails, reset the Wi-Fi on
the device.
To Next Page
Loading...
