Installation 15
devolo dLAN 200 AVpro mini
3.3 Functions
The dLAN 200 AVpro mini features 3 control LEDs as
well as a network port and an encryption button:
Power
green: Lit steady when dLAN 200 AVpro mini is ready
for operation; flashes when it is in standby mode.
dLAN
green: The network connection is suitable for HD video
streaming; flashes when data is being transmitted.
orange: The network connection is suitable for SD vid-
eo streaming; flashes when data is being transmitted.
red: The network connection is suitable for simple data
transfer and Internet access; flashes when data is be-
ing transmitted.
Ethernet
green: A 100 Mbps or 10 Mbps connection to the
Ethernet network exists; flashes when data is being
transmitted.
The function of the LED status dis-
play can be deactivated in the
dLAN AVpro manager software.
Network connection
This is the connection point on the
dLAN 200 AVpro mini for connecting it to a computer
or another network device with the network cable (in-
cluded) (Fig. 7).
Encryption button
Data encryption at the touch of a button; For more in-
formation on the functions of the encryption button,
please see the chapter 4.2 dLAN network encrypti-
on at the touch of a button.
For safety reasons, you can deacti-
vate the encryption button in the
dLAN AVpro manager software.
Standby mode
A dLAN AVpro device switches to Standby mode after
a short while if no active network device such as a com-
To Next Page
Loading...
Need help?
General