Devolo dLAN 500 AVpro+ - dLAN AVpro Manager for Windows

22 dLAN network
devolo dLAN 500 AVpro+
Removing a dLAN AVpro device from a network
(Fig. 10)
To remove a dLAN 500 AVpro+ or another dLAN
AVpro device from an existing network, press its en-
cryption button for at least ten seconds. The device
will be assigned a new randomly generated password
and will thus no longer be able to access the network.
To integrate the device into a different dLAN network,
follow the steps described above, depending on
whether you are setting up a new network or adding
the adapter to an existing one.
Fig. 10