22 dLAN pro network
devolo dLAN pro 1200+
Removing a dLAN pro device from a network
To remove a dLAN pro 1200+ or another dLAN pro de-
vice from an existing network, press its encryption but-
ton for at least ten seconds. The device will be
assigned a new randomly generated password and will
thus no longer be able to access the network. To inte-
grate the device into a different dLAN pro network, fol-
low the steps described above, depending on whether
you are setting up a new network or adding the device
to an existing one.
To Next Page
Loading...
