Devolo Home Control User Manual

7
Add device
 devolo Home Control Motion Sensor. Follow the instructions in the Home Control
portal for logging into your Home Control Central Unit.
Installing the Home Control Motion Sensor
Install the Home Control Motion Sensor on a flat and level surface so that the black
release button on the rear of the sensor is depressed when the device is installed.
 Before permanently fastening the Home Control Motion Sensor at the desired location, test whether the
sensor can be triggered. If the LED flashes when passing by, the sensor is positioned optimally.
 If using the double-sided tape to fasten the Home Control Motion Sensor, adhere the tape
strip to the centre (below the release button) on the rear of the sensor and attach the
Home Control Motion Sensor to the desired location.
If installing to a wall using screws, make sure that no gas, water or power lines in
the wall get damaged. There is a danger of electric shock!

Devolo Home Control Specifications

General

Type	Door/Window Contact
Technology	Z-Wave
Power Supply	Battery
Battery Life	Up to 2 years
Operating Temperature	0°C to 40°C
Range	Up to 30 m (indoors)
Compatibility	Z-Wave compatible gateways