18
Connecting the Home Control Central Unit to the internet router using an existing dLAN net-
work
햲 Taking the above factors into consideration, plug the Home Control Central Unit into a wall outlet that is
located centrally in your house or flat.
햳 To connect the Home Control Central Unit to the Internet router via your existing dLAN network,
first press the home or encryption button (for 1 second) on an existing dLAN adapter (e.g. the
one on the Internet router) in your network, and then – within 2 minutes – press the dLAN encryption
button with the home icon (for 1 second) on the Home Control Central Unit.
햴 As soon as you are connected to your dLAN or LAN network, the Home Control button (check mark)
on the device illuminates white. If the Home Control button flashes red, there is no connection to the
Home Control Central Unit.
For the Home Control Central Unit to be recognised automatically in the
Home Control portal when first installed, both the Home Control Central Unit and
the device with which you are accessing it must be connected through the same LAN.
If instead you use separate Internet connections, you have to enter the serial number
of the Home Control Central Unit manually. The serial number (e.g. S/N:
12312312312312) of the Home Control Central Unit is located on the title page of
the installation guide and on the label on the rear of the unit's housing. If you have
to enter the serial number, you should do so when you add the
Home Control Central Unit in the portal, as described under instruction
햺.