24
Flashing behaviour of the Home Control LED (check mark)
LED Flashing behaviour Description
Red LED Flashes at intervals of
0.5 sec. (on/off)
No connection to the Home Control portal exists
Red LED Lights up steady Recovery file: The installation of the update failed for the
second time
White LED Flashes at intervals of 2
sec.(on/off)
Booting process of the Home Control Central Unit. If the
Home Control Central Unit is ready for operation, the LED
goes out
White LED Flashes at intervals of
0.5 sec. (on/off)
Inclusion of the Home Control devices
White LED Flashes at intervals of
0,1 sec. (on/off)
The firmware update process is running
White LED Lights up steady A connection to the Home Control portal exists
To Next Page
Loading...
