Need help?Do you have a question about the DeWalt D21160 and is the answer not in the manual?
General| No Load Speed | 0-2600 rpm |
|---|---|
| Chuck Capacity | 1.5-13 mm |
| Max. Drilling Capacity [Wood] | 30 mm |
| Max. Drilling Capacity [Steel] | 13 mm |
| Spindle Thread | 1/2" x 20 U.N.F |
| Type | Hammer Drill |
| Voltage | 230 V |
| Max Drilling Capacity (Wood) | 30 mm |
| Chuck Size | 13 mm |
| Power Source | Corded |
To Next Page
