DeWalt D21441 - Page 5

19
ENGLISH
Congratulations!
You have chosen a D E WALT tool. Years of
experience, thorough product development and
innovation make D
E WALT one of the most reliable
partners for professional power tool users.
Technical data
D21441
Voltage V 230
(UK & Ireland) V 230/115
Power input W 770
No-load speed
1st gear min
-1
0 - 1,100
2nd gear min
-1
0 - 2,700
Maximum drilling range in
steel/wood/concrete mm 13/35/-
Chuck spindle thread size UNF 1/2" x 20
Collar diameter mm 43
Maximum chuck capacity mm 13
Weight kg 2.3
Fuses:
Europe 230 V tools 10 Amperes, mains
U.K. & Ireland 230 V tools 13 Amperes, in plugs
U.K. & Ireland 115 V tools 16 Amperes, mains
The following symbols are used throughout this
manual:
Denotes risk of personal injury, loss
of life or damage to the tool in case of
non-observance of the instructions in
this manual.
Denotes risk of electric shock.
EC-Declaration of conformity
D21441
D
E WALT declares that these power tools have
been designed in compliance with: 98/37/EC,
89/336/EEC, 73/23/EEC, 86/188/EEC, EN 60745,
EN 60745-2, EN 55014-1, EN 55014-2,
EN 61000-3-2 & EN 61000-3-3.
For more information, please contact D
E WALT
at the address below, or refer to the back of the
manual.
D21441
L
pA
(sound pressure) dB(A) 83
L
WA
(acoustic power) dB(A) 94
Weighted RMS acceleration value m/s
2
< 2.5
K
pA
(sound pressure uncertainty) dB(A) 2.8
K
WA
(acoustic power uncertainty) dB(A) 2.8
Director Engineering and Product Development
Horst Großmann
D E WALT, Richard-Klinger-Straße 11
D-65510, Idstein, Germany
ROTARY DRILL D21441