Need help?Do you have a question about the DeWalt D25501 and is the answer not in the manual?
General| Type | Rotary Hammer |
|---|---|
| Power Source | Corded |
| Voltage | 230V |
| Chuck Type | SDS-Plus |
| Max. Drilling Capacity [Wood] | 30 mm |
| Max. Drilling Capacity [Steel] | 13 mm |
Details sound pressure and sound power levels with uncertainty.
Measured vibration levels for drilling and chiselling according to EN 60745.
Defines severity levels for signal words like DANGER, WARNING, CAUTION, NOTICE.
Covers general warnings, work area, electrical, and personal safety.
Information on when and how to service the power tool.
Specific safety advice for rotary hammer operation.
Inherent risks associated with rotary and chipping hammers.
Explains the meaning of various pictograms shown on the tool.
Covers intended applications and the soft start feature.
Details electronic speed and impact control features.
Covers torque limiting and complete torque control.
Explains Adaptive Drill Control and Service Indicator LEDs.
Describes the vibration-dampened main handle.
Steps for attaching the side handle to the front or rear of the tool.
How to select modes and index the chisel position.
Details on adjusting speed, impact, torque, and depth.
Covers proper hand position and switching the tool on/off.
Step-by-step guide for drilling holes with solid bits.
Instructions for drilling larger holes using core bits.
Procedures for using the tool for chipping and demolition.
Information on brush wear and servicing.
Notes on the tool's lubrication requirements (none).
Instructions for safely cleaning the tool's exterior.
Information on compatible DEWALT accessories.
Guidelines for responsible disposal and recycling.
To Next Page
