DeWalt D25553 - User Manual

If you have questions or comments, contact us.
Pour toute question ou tout commentaire, nous contacter.
Si tiene dudas o comentarios, contáctenos.
1-800-4-DeWALT
Instruction Manual
Guide D’utilisation
Manual de instrucciones
D25501, D25553
1–9/16" (40 mm) SDS Max and Spline Combination Hammers
D25601, D25603, D25651
1–3/4" (45 mm) SDS Max and Spline Combination Hammers
D25831, D25851
SDS Max and Spline Chipping Hammers
D25501, D25553
Marteaux mixtes, SDS Max et cannelures, 40 mm (1–9/16 po)
D25601, D25603, D25651
Marteaux mixtes, SDS Max et cannelures, 45 mm (1–3/4 po)
D25831, D25851
Marteaux burineurs, SDS Max et cannelures
D25501, D25553
Martillos de 40 mm (1–9/16") SDS Max y estriados de combinación
D25601, D25603, D25651
Martillos de 45 mm (1–3/4") SDS Max y estriados de combinación
D25831, D25851
Martillos de burilado SDS Max y estriados
final page size: 8.5 x 5.5 in

DeWalt D25553 Specifications

General

Power Source	Corded
Voltage	230 V
Max. Concrete Drilling Capacity	45 mm
Type	Rotary Hammer
Drilling Capacity (Concrete)	45 mm
Drilling Capacity (Wood)	30 mm
Drilling Capacity (Steel)	13 mm
Chuck Type	SDS Max

Summary

Safety Information and Warnings

Definitions: Safety Alert Symbols and Words

Explains safety alert symbols and words used in the manual for hazard communication.

General Power Tool Safety Warnings

Comprehensive safety guidelines covering work area, electrical, personal safety, and tool use.

Service and Specific Safety Instructions

Guidelines for tool service, maintenance, and specific safety advice for rotary hammers.

Tool Components and Operation

Components, Intended Use, and Adjustments

Identifies tool parts, intended purpose, and procedures for assembly and adjustments.

Vibration Control and Accessory Installation

Details on the vibration control system and guides for fitting SDS Max and Spline drive accessories.

Clutch, Mode Selection, and Operation

Explanation of clutch settings, mode selector, and operating modes like hammerdrilling and chipping.

Operation Controls and Procedures

Information on chisel adjustment, indicator lights, hand position, and trigger switch operation.

Drilling, Chiseling, Maintenance, and Cleaning

Step-by-step guides for drilling and chipping, plus instructions for tool upkeep and cleaning.

Support and Specifications

Lubrication, Accessories, and Repairs

Guidance on tool lubrication, recommended accessories, and procedures for repairs.

Warranty and Product Registration

Details on the three-year limited warranty, free service, and product registration benefits.

Technical Specifications

Provides detailed specifications for various DeWalt tool models.