DeWalt D25651 - User Manual

If you have questions or comments, contact us.
Pour toute question ou tout commentaire, nous contacter.
Si tiene dudas o comentarios, contáctenos.
1-800-4-DeWALT
Instruction Manual
Guide D’utilisation
Manual de instrucciones
D25501, D25553
1–9/16" (40 mm) SDS Max and Spline Combination Hammers
D25601, D25603, D25651
1–3/4" (45 mm) SDS Max and Spline Combination Hammers
D25831, D25851
SDS Max and Spline Chipping Hammers
D25501, D25553
Marteaux mixtes, SDS Max et cannelures, 40 mm (1–9/16 po)
D25601, D25603, D25651
Marteaux mixtes, SDS Max et cannelures, 45 mm (1–3/4 po)
D25831, D25851
Marteaux burineurs, SDS Max et cannelures
D25501, D25553
Martillos de 40 mm (1–9/16") SDS Max y estriados de combinación
D25601, D25603, D25651
Martillos de 45 mm (1–3/4") SDS Max y estriados de combinación
D25831, D25851
Martillos de burilado SDS Max y estriados
final page size: 8.5 x 5.5 in

DeWalt D25651 Specifications

General

Type	Rotary Hammer
Power Source	Corded
Voltage	120V
Blows per Minute	4600 bpm
No Load Impacts Per Minute	4600 ipm
Chuck Type	SDS Plus
Max. Drilling Capacity (Concrete)	26 mm
Maximum Drilling Diameter (Steel)	13 mm

Summary

Definitions: Safety Alert Symbols and Words

Components Overview

Identifies and labels key components of the tool shown in Fig. A.

General Power Tool Safety Warnings

Work Area Safety

Safety precautions related to the operating environment.

Electrical Safety

Guidelines for safe use of electrical power tools.

Personal Safety

Essential personal safety measures during operation.

Additional Safety Instructions for Rotary Hammers

Additional Safety Information

Further safety warnings and precautions for tool usage.

Extension Cord Requirements

Intended Use

Defines the proper applications and limitations of the tool.

Assembly and Adjustments

Instructions for assembling and adjusting the tool components.

Side Handle Attachment

Guidance on attaching and using the side handle for control.

SHOCKS Active Vibration Control System

Accessory Insertion and Removal

Step-by-step guide for attaching and detaching accessories.

Clutch and E-Clutch Features

Electronic Speed and Impact Control

How to adjust speed and impact for various applications.

Mode Selection

Instructions for selecting hammerdrilling or chipping modes.

Chisel Bit Adjustment

Indicator Lights and Operation

Explains indicator lights, hand position, and trigger switch use.

Soft Start and Drilling;Chiseling Procedures

Maintenance and Cleaning

Instructions for tool maintenance, cleaning, and safety.

Lubrication and Accessories

Maximum Capacity and Repairs

Technical capacity limits and guidelines for tool repairs.

Warranty and Registration

Details of the limited warranty and product registration benefits.