Need help?Do you have a question about the DeWalt D25831 and is the answer not in the manual?
General| Power Source | Corded Electric |
|---|---|
| Voltage | 230 V |
| Vibration Control | Yes |
| Toolholder | SDS-Max |
| Amperage | 8.5A |
| Power Input | 1050 W |
| Weight (kg) | 5.3 kg |
Detailed specifications for DEWALT hammer models, including power, speed, and dimensions.
Statement of compliance with EU directives for DEWALT hammer products.
Guidelines for maintaining a safe work environment to prevent accidents.
Precautions for safe use of electrical power tools and avoiding electric shock.
Advice on protective equipment and maintaining alertness during tool operation.
Best practices for operating and maintaining power tools for safety and longevity.
Special safety advice for rotary hammers, including ear protection and auxiliary handle use.
Identification of inherent risks that remain even with safety regulations, like hearing impairment.
Details on double insulation, transformer use for 115V units, and cord replacement.
Instructions for safely replacing the mains plug on DEWALT tools in the UK and Ireland.
Guidelines for selecting and using extension cables with DEWALT power tools.
List of items included in the tool's packaging, such as the tool, handle, and manual.
Explanation of pictograms and numbered parts shown on the tool diagrams.
Description of the specific applications for which DEWALT hammers are designed.
Explains how the soft start feature prevents drill bit walking and reduces torque reaction.
Details on the electronic dial for adjusting speed and impact for optimal control.
Information on torque limiting clutch and two-stage mechanical clutch for safety and control.
Explanation of yellow (brush wear) and red (fault/lock-on) indicator lights for maintenance alerts.
Describes the function of the main handle dampers in reducing user vibration exposure.
Step-by-step guide for attaching and positioning the side handle for optimal use.
Instructions for inserting and removing SDS Max accessories from the tool holder.
How to choose between hammer drilling and hammering only modes using the selector switch.
Procedure for setting the chisel to one of 18 available positions for optimized work.
Using the electronic dial to adjust speed and impact for different material drilling and chiselling.
How to set the torque control lever to 40 Nm or 80 Nm for different application needs.
Instructions for using the depth rod accessory to control drilling depth accurately.
General guidance on safe operation, including hand position and switching the tool on/off.
Steps for hammer drilling, drilling with solid bits, and using core bits for various applications.
Recommendations for cleaning the tool using dry air and avoiding solvents for longevity.
Information on carbon brushes, service LEDs, and when professional maintenance is required.
Note on no lubrication needed, advice on accessories, and environmental protection.
To Next Page
