4
English
FIG. 1
A
B
C
D
F
G
H
ASSEMBLY (FIG. 1–4)
WARNING: To reduce the risk of serious personal injury,
turn tool off and disconnect tool from power source before
making any adjustments or removing/installing attachments
or accessories.
WARNING: When using electric appliances, always follow
basic safety precautions to reduce the risk of fire, electric shock
and personal injury.
WARNING: The flat pleated filter
FIG. 2
P
(P) must always be in place while
vacuuming. When vacuuming fine
dust, you may also use an additional
paper filter or fleece bag.
1. Release the two canister locks
(C), (one on each side of vacuum
cleaner).
2. Lift the vacuum lid from the canister and carefully set aside.
3. Remove wheels and accessories from canister.
4. Turn canister over and place on a solid flat surface.
FIG. 3
D27905D27904
R
Q
R
Q
S
S
5. Slide wand bracket (S) onto tank as shown BEFORE
assembling wheels assembly (R).
6. Insert the casters (Q) into holes provided and press firmly to
seat in place.
Model D27904 is shown
E
I
K
L
J
O
N
M
To Next Page
Loading...
Need help?
General
