To Next PageTo Next PageHow to fix DeWalt Vacuum Cleaner if motor does not run?
If the motor of your DeWalt Vacuum Cleaner does not run, check the power cord, plugs, and outlet. Also, ensure that the on/off switch is in the ON position.
What to do if my DeWalt DXV16P Vacuum Cleaner stops running?
If your DeWalt Vacuum Cleaner stops running, a thermal overload may have been tripped. To resolve this: 1. Turn off the vacuum and disconnect it from the power source. 2. Empty the canister if needed. 3. Allow the unit to cool down. 4. Plug the power cord into an appropriate outlet and turn the on/off switch to the ON position to test. Also, check for proper filter installation and ensure filters are not damaged, replacing them if necessary. If the vacuum still won't restart, call 1-888-899-0146.
General| Model | DXV16P |
|---|---|
| Type | Wet/Dry Vacuum |
| Tank Capacity | 16 gallons |
| Power | 6.5 HP |
| Hose Length | 7 feet |
| Hose Diameter | 2.5 inches |
| Cord Length | 10 feet |
| Filter Type | Cartridge Filter |
| Included Accessories | Utility Nozzle, Crevice Nozzle, Cartridge Filter |
Lists detailed technical specifications for the vacuum cleaner, including power and capacity.
Explains the meaning of safety alert words and symbols used in the manual.
Provides essential safety precautions for using electric appliances to prevent hazards.
Details the importance of using correctly sized and rated extension cords for safe operation.
Emphasizes wearing safety goggles, hearing protection, and masks when operating the vacuum.
Warns about specific chemicals in dust that may cause cancer or birth defects.
Guides through the initial setup and assembly of the vacuum cleaner.
Provides step-by-step instructions for attaching the caster wheels to the dust tank.
Explains the correct procedure for installing the cartridge filter for dry pick-up.
Guides on how to properly install the disposable filter bag for dry collection.
Instructions on how to safely empty the vacuum tank after wet pick-up operations.
Covers procedures and warnings for replacing or cleaning the vacuum's filter.
Provides solutions for when the vacuum motor fails to start or operate.
Addresses common causes and solutions for diminished suction power.
Offers troubleshooting steps for when the vacuum unexpectedly stops during operation.
Provides solutions for dust being expelled from the vacuum during operation.
