To Next PageTo Next PageWhat to do if my DeWalt DXV12P-QTA stops running?
If your DeWalt Vacuum Cleaner suddenly stops running, it might be due to a thermal overload. Here's what to do: 1. Turn off the vacuum and disconnect it from the power source. 2. Empty the canister, if needed. 3. Let the unit cool down. 4. Plug the power cord back into the outlet and turn the on/off switch to the ON position to test it. If it still won't restart, call 1-888-899-0146.
How to stop dust from coming out of my DeWalt Vacuum Cleaner?
If dust is coming out of your DeWalt Vacuum Cleaner while you're vacuuming, check the following: * Ensure that the filters are installed correctly. * Make sure the filters aren't damaged, and replace them if they are. * Check that the filter seals are in place and secure.
Why is the suction capacity of my DeWalt DXV12P-QTA Vacuum Cleaner decreasing?
If your DeWalt Vacuum Cleaner's suction capacity is decreasing, here's what you can do: * Check and remove any blockages in the suction nozzle, suction tube, suction hose, or filters. * Replace the paper or fleece dust bag. * Make sure the filters are installed correctly. * Clean or replace the filters if they are dirty. * Empty the dust tank.
General| Model | DXV12P-QTA |
|---|---|
| Category | Vacuum Cleaner |
| Type | Wet/Dry Vacuum |
| Included Accessories | Crevice Tool, Filter |
| Filter Type | Washable Filter |
Guide for initial unpacking and assembly steps.
Instructions for attaching the casters to the vacuum.
Steps to assemble the accessory bag holder.
Guidance on replacing the vacuum filter.
