DeWalt D28474W User Manual

DEWALT Industrial Tool Co., 701 East Joppa Road, Baltimore, MD 21286 (APR04-CD-1)
Form No. 399080-03 D28474, D28493, D28493G, D28494, D28494G, D28499, D28497
Copyright © 2003
The following are trademarks for one or more DEWALT power tools: the yellow and black color scheme; the “D” shaped air intake grill; the
array of pyramids on the handgrip; the kit box configuration; and the array of lozenge-shaped humps on the surface of the tool.
ACCESSORY
7''
Type 27
Grinding
Wheel
9''
Type 27
Grinding
Wheel
6''
Abrasive
Cup
Stone
5''
Abrasive
Cup
Stone
4''
Abrasive
Cup
Stone
6''
Wire
Wheel
4''
Wire
Cup
Brush
6''
Wire
Cup
Brush
7''
Diamond
Cup
Wheel
7''
Sanding
Flap
Disc
9''
Sanding
Disc
7''
Type 1
Diamond
or
Abrasive
Wheel
7''
Sanding
Disc
D28493N
5000 rpm
OPTIMAL CAPABLE CAN NOT BE USED
D28494S
6000 rpm
D28494N
6000 rpm
D28474W
8000 rpm
REQUIRED
GUARD
Must Be
Used with
D284937
Must Be
Used with
D284939
Must Be
Used with
D284936
Must Be
Used with
D284936
Must Be
Used with
D284934
Must Be
Used with
D284937
/D284939
Must Be
Used with
D284937
/D284939
Must Be
Used with
D284937
/D284939
Must Be
Used with
D284937
Must Be
Used with
D284937
Must Be
Used with
D284931
Application Information

DeWalt D28474W Specifications

General

Power Source	Corded Electric
Dust Collection	Yes
Height	5.5 inches
Type	Angle Grinder
Voltage	120V
No Load Speed	8500 RPM
Pad Size	5 inches
Max. Disc Diameter	5 inches
Spindle Thread	5/8-11
Wheel Diameter	5 inches

Summary

General Safety Instructions

ELECTRICAL SAFETY

Details precautions related to electrical hazards and tool grounding.

PERSONAL SAFETY

Emphasizes user alertness, proper attire, and avoiding distractions.

Specific Safety Rules for Grinders

Assembly and Adjustments

Attaching the Side Handle

Rotating the Rear Handle

Rotating the Gear Case

Operation

Power Source

Mounting and Using Depressed Center Grinding Wheels and Sanding Flap Discs

Accessory Usage Techniques

Covers methods for surface grinding, edge grinding, and finishing.

Maintenance

Cleaning

Procedures for cleaning the tool's motor housing and parts.

Motor Brushes