To Next PageTo Next Page
Need help?Do you have a question about the DeWalt D55276 and is the answer not in the manual?
General| Type | Stationary |
|---|---|
| Max Pressure | 200 PSI |
| Tank Capacity | 4.5 Gallons |
| Weight | 86 lbs |
| Maximum Pressure | 200 PSI |
| Pump Type | Oil-Free |
| Power Source | Electric |
| Tank Size | 4.5 Gallons |
| Voltage | 120V |
| Amps | 15 Amps |
| CFM at 90 PSI | 2.6 CFM |
Details for G PUMP and K PUMP specifications.
Details for HONDA GX160 and GX270 engines.
Identifies hot components on the compressor diagrams.
Explains safety signal words: DANGER, WARNING, CAUTION.
Key warnings before operating the compressor.
Details risks from exhaust fumes, gasoline, and air.
Explains air tank safety and potential causes of explosion.
Covers risks from flying objects, hot components, and moving parts.
Details risks from moving parts and hot surfaces.
Addresses safe lifting, noise, and unloader valve function.
Explains regulator, throttle control, and low oil sensors.
Describes safety valve, air intake filter, and pressure gauges.
Covers hose assembly, engine/pump oil, and fueling.
Discusses placement for ventilation and avoiding damage.
Safety advice for moving and lifting the compressor.
Essential checks before starting the compressor.
Steps for initial setup and the break-in period.
Step-by-step guide for starting and running the compressor.
Details recommended maintenance tasks and frequency.
Instructions for checking air filter, safety valve, and draining tank.
Steps for checking and changing oil for K and G pump units.
Guide for checking and adjusting belt tension.
Procedure for pulley alignment and information on accessories.
Details on service, repairs, and qualified personnel.
Details the one-year warranty and defines technical terms.
Explains California code compliance and unloader operation.
