DeWalt DCB1104 - Package and Tool Identification; Package Contents; Tool Markings and Symbols; Date Code Location

7
ENGLISH
• The location in which the charger is used should be
clean and dry. Use of a charger in a dirty or wet area could
result in risk of fire, electric shock, orelectrocution.
SAVE THESE INSTRUCTIONS
Date Code Position (Fig.A)
The date code
4
, which also includes the year of manufacture, is printed into thehousing.
Example:
2021XX XX
Year and Week of Manufacture
Description (Fig.A)

WARNING: Never modify the power tool or any part of it. Damage or personal injury
couldresult.
1
Battery
2
Battery release button
3
Charger
Intended Use
The DCB1104 charger is designed for charging 18V DeWALT Li‑Ion XR and XR FLEXVOLT
battery packs: DCB181, DCB182, DCB183, DCB183B, DCB183G, DCB184, DCB184B, DCB184G,
DCB185, DCB187, DCB189, DCB546, DCB547, DCB548, DCB549, DCBP034.
Package Contents
The package contains:
1 Battery charger
1 Instruction manual
NOTE: Battery packs, chargers and kitboxes are not included with Nmodels.
• Check for damage to the tool, parts or accessories which may have occurred
duringtransport.
• Take the time to thoroughly read and understand this manual prior tooperation.
Markings on Tool
The following pictograms are shown on the tool:
a
Read instruction manual beforeuse.