English
For more information regarding fuel gauge battery packs, please call
eWALT
CAUTION: Do not point unit discharge at self or
bystanders.
CAUTION: Always wear safety glasses. Wear a
filter mask if the operation is dusty. Use of gloves, long pants and
substantial footwear is recommended. Keep long hair and loose
clothing away from openings and moving parts.
further. The speed lock lever can also be pulled back to start the
blower without needing to first depress the trigger switch.
surface. Slowly advance keeping the accumulated pile of debris in
front of you.
To install battery pack:
Make sure battery pack is fully seated and fully latched into position.
To remove battery pack:
the top of the battery housing and pull battery pack out of appliance
FIG. 4
G
F
H
Some DeWALT battery packs include a fuel gauge which consists of
three green LED lights that indicate the level of charge remaining in the
battery pack.
To actuate the fuel gauge, press and
combination of the three green LED
lights will illuminate designating the
level of charge left. When the level of
charge in the battery is below the
usable limit, the fuel gauge will not
illuminate and the battery will need to
be recharged.
NOTE: The fuel gauge is only an indication of the charge left on the battery
pack. It does not indicate tool functionality and is subject to variation
To Next Page
Loading...
Need help?
General
