Need help?Do you have a question about the DeWalt DCD920 and is the answer not in the manual?
General| Voltage | 18V |
|---|---|
| Chuck Size | 1/2 inch |
| Max Torque | 450 in-lbs |
| Speed Settings | 2 |
| Type | Drill Driver |
| No Load Speed | 0-450 / 0-1500 RPM |
Product compliance with EC Machinery Directive and relevant standards.
Keep work area clean, avoid explosive atmospheres, keep bystanders away.
Match plugs, avoid grounded surfaces, protect from water and damaged cords.
Stay alert, use PPE, prevent unintentional starting, remove adjustment keys.
Explains tool pictograms and their meanings.
Location and format of the manufacturing date code.
Details about DE9116 and DE9135 charger compatibility and operation.
Step-by-step guide for charging battery packs.
Covers Automatic Refresh, Hot/Cold Pack Delay, and Li-Ion protection.
Correct grip for operating the tool safely.
Guide for using the drill function correctly.
Guide for using the screwdriver function with torque control.
Guide for using the hammer drill function for masonry.
Steps for safely installing and removing the battery pack.
Controls tool speed via trigger activation.
Provides stability and control during operation.
Selects tool rotation direction and locks the trigger.
Illuminates the work surface during operation.
Selects between drilling, screwdriving, and hammerdrilling modes.
Sets the clutch for desired torque in screwdriving mode.
Allows selection of different speed and torque ranges.
Facilitates quick and easy accessory changes.
Instructions for cleaning the tool housing and charger.
Recommendations for using DEWALT-approved accessories.
Guidelines for product disposal and recycling.
Advice on battery pack end-of-life disposal and recycling.
Return policy for complete satisfaction within 30 days of purchase.
Entitlement to one free service within 12 months of purchase.
Warranty covering faulty materials or workmanship within 12 months.
To Next Page
