To Next PageTo Next Page
Need help?Do you have a question about the DeWalt DCE155 and is the answer not in the manual?
Keep work area clean and lit, avoid explosive atmospheres, keep children away.
Match plugs, avoid earthed contact, do not expose to rain, use outdoor cords, use GFCI.
Stay alert, use PPE, prevent unintentional start, dress properly.
Do not force, maintain tools, keep cutting tools sharp.
Recharge correctly, use designated packs, keep away from metal, avoid liquid contact.
Have tool serviced by qualified personnel using identical parts.
Read warnings, do not charge in explosive atmospheres, never force pack, charge in designated chargers, do not splash.
Example of how to read battery labels for shipping and use Watt hour ratings.
Explains the fuel gauge with 3 green LEDs indicating charge level.
Explains the delay function for charging too hot or too cold battery packs.
Specifies the cable cutter is for copper, aluminum, and ACSR cable cutting only.
Describes how the trigger switch actuates the blade and the brake function.
Explains how the button controls direction and locks the trigger.
Safety precautions and attachment instructions for the hang hook.
Instructions and warnings for replacing the movable blade.
Step-by-step guide on how to install and remove the battery pack.
Table showing the maximum cable sizes the cutter can handle.
Instructions for cleaning the tool, including warnings about solvents.
Table listing DEWALT chargers and their charge times for various batteries.
General
