DeWalt DCF894 - Technical Data; Cordless Impact Wrench; Definitions: Safety Guidelines

24
ENGLISH
hands warm (relevant for vibration), organisation of
workpatterns.
EC-Declaration of Conformity
Machinery Directive
18V Cordless Impact Wrench
DCF894, DCF894H
DeWALT
declares that these products described under
Technical Data are in compliance with:
2006/42/EC, EN62841-1:2014, EN62841-2-2:2014.
These products also comply with Directive 2014/30/EU and
2011/65/EU. For more information, please contact
DeWALT
at
the following address or refer to the back of themanual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of
DeWALT
.
Markus Rompel
Vice President of Engineering, PTE-Europe
DeWALT
, Richard-Klinger-Straße 11,
D-65510, Idstein, Germany
16.08.2019
WARNING: To reduce the risk of injury, read the
instructionmanual.
Definitions: Safety Guidelines
The definitions below describe the level of severity for each
signal word. Please read the manual and pay attention to
thesesymbols.

DANGER: Indicates an imminently hazardous
situation which, if not avoided, will result in death or
seriousinjury.

WARNING: Indicates a potentially hazardous situation
which, if not avoided, could result in death or
seriousinjury.

CAUTION: Indicates a potentially hazardous situation
which, if not avoided, may result in minor or
moderateinjury.
NOTICE: Indicates a practice not related to
personal injury which, if not avoided, may result in
propertydamage.

Denotes risk of electricshock.

Denotes risk offire.
English (original instructions)
18V CORDLESS IMPACT WRENCH
DCF894, DCF894H
Congratulations!
You have chosen a
DeWALT
tool. Years of experience, thorough
product development and innovation make
DeWALT
one of the
most reliable partners for professional power toolusers.
Technical Data
DCF894 DCF894H
Voltage V
DC
18 18
Type 1 1
Battery type Li-Ion Li-Ion
No load speed
1st speed min
-1
0–900 0–900
2nd speed 0–2000 0–2000
3rd speed 0–2000 0–2000
Impact rate min
-1
0–3100 0–3100
Max. torque Nm 447 447
Tool holder 1/2"
(13 mm)
1/2"
(13 mm)
Weight (without battery pack) kg 1.5 1.5
Noise values and/or vibration values (triax vector sum) according to EN62841-2-2.
L
PA
(emission sound pressure
level)
dB(A) 94 94
L
WA
(sound power level) dB(A) 105 105
K (uncertainty for the given
sound level)
dB(A) 3 3
Vibration emission value a
h
= m/s
2
13.5 13.5
Uncertainty K = m/s
2
4.4 4.4
The vibration and/or noise emission level given in this
information sheet has been measured in accordance with
a standardised test given in EN62841 and may be used to
compare one tool with another. It may be used for a preliminary
assessment ofexposure.

WARNING: The declared vibration and/or noise emission
level represents impact tightening of fasteners of the
maximum capapcity of the tool. However if the tool is
used for different applications, with different accessories
or poorly maintained, the vibration and/or noise emission
may differ. This may significantly increase the exposure
level over the total workingperiod.
An estimation of the level of exposure to vibration and/
or noise should also take into account the times when the
tool is switched off or when it is running but not actually
doing the job. This may significantly reduce the exposure
level over the total workingperiod.
Identify additional safety measures to protect the
operator from the effects of vibration and/or noise such
as: maintain the tool and the accessories, keep the